FLUXstrip cSpec Enhanced Plus

FLUXstrip Enhanced Plus LED Module with Samsung LM301H Evo

• cSpec Enhanced Plus spectrum for the regenerative phase
• Efficiency above 3.2 µmol/J (@1000 mA, 24 Watt)
• up to 50 Watt
• maximum 2000 mA
• plugable connector (WAGO 2060)
• 480 x 20 x 5.5 mm (L x W x H)
• recommended for use with constant current sources (LED Drivers)

cSpec Enhanced Plus Spectrum

In addition to exceptional photon efficiency, our newly developed cSpec Enhanced spectrum boasts significant improvements in photon absorption. For example, the peak at 435 nm can better address the photosystem and expands the usual peak at 450 nm to a plateau. These two wavelengths set the foundation for the balanced full spectrum needed for healthy plant development.

With the additional 660 nm and 730 nm boosts, the photon yield is further optimised and a well-balanced spectrum is made possible, especially for the regenerative phase.

Samsung LED Strips with LM301H Evo, Oslon Square and Oslon Optimal

Samsung LM301H Evo is a new development from Samsung with a 435nm chip. The LEDs are specified with 3.17 µmol/J. To achieve a balanced spectrum, we also use the proven LM301H with 3500K. The highly efficient Oslon Square 660 nm LEDs (4.2 µmol/J) and Oslon Optimal 730 nm Far Red LEDs (4.0 µmol/J) are responsible for the spectrum in the deep and far red range.

Mounting and cooling of the LED module

The LED Board is suitable for easy mounting on standard grooved profiles (e.g. Item Profiles 40×40 with 8 mm groove). This enables cost-effective and flexible designs because the aluminium profiles are used directly as heat sinks.

Ressources

FLUXstrip Enhanced Plus

Heat management study

Wiring instructions